High speed, the fastest processing speed for “L”shape up to 18 seconds/piece; the fastest processing speed for 口 shape is 28 seconds/piece; Front and rear double screen control, easy to operate; With 4 lifting Pittsburgh lock forming system for automatic switching; Support input of 10 groups of processing data and opening data of different specifications at the same time; With high speed and standard speed two production modes; Support a variety of welding duct processing modes: right-angle welding, lap edge welding, middle butt welding, middle seam welding etc; With the function of production data management; Servo pusher replaces cylinder or stepping motor pusher.
1. Processing sheet thickness: galvanized sheet 0.5-2.0mm, stainless steel 0.5-1.5mm, different functions corresponding to the sheet thickness is different.
2. Standard configuration: flange, Angle iron flange air duct forming; With punching middle reinforcement hole, flange surface screw hole, sheet double-sided coating function, with stainless steel welding duct processing mode.
3. Optional: square beading, C cleat forming, blocking function, TDF inner flange function, Angle iron inner flange function.
4. The above functions can be any combination, to achieve in one production line.
NO. |
Model |
Capacity in mild-steel
|
Max-width |
Max-working |
Coiler |
Dimensions |
Power |
Weight |
1001 | ADL-H5C20S15-1250 |
0.5-2.0 Galvanized steel
|
1250 | 20 | 7000 | 17500×7700x1500 | 51 | 18000 |
---|---|---|---|---|---|---|---|---|
1002 | ADL-H5C20S15-1500 |
0.5-2.0 Galvanized steel
|
1500 | 20 | 7000 | 17500×8450x1500 | 51 | 19000 |
设备外观、配置、技术参数仅供参考,请以实物为准
|